Woodworking Saw Blade110X1.8X20X40T

Thickened tooth surface

The left and right teeth are engineered with scientifically calculated angles. This design ensures the blade stays sharp,ideal for cutting and trimming both soft and hard solid wood materials.

Clean and smooth cut surface

Our saw blade features a smooth cutting surface.It delivers high flatness and stale operation,ensures efficient performance with dry cutting that prevents blade burn,and resists chipping.

Cutting sharply

This professional,all-purpose cutting blade are exceptionally sharp and durable,which ensures high efficiency,cutting accuracy,and superior impact resistance.

Selection of quality materials

The tools are manufactured from high-quality materials that are so strong and resilient that they resist breaking, fracturing, and chipping, thereby ensuring safe and worry-free application.

 

 

Description	woodworking saw blade
Dimension	110X1.8X20X40T
	outside diameter110mm inside diameter 20mm sawtooth width1.8mm sawtooth numbers 40
	other dimensions can be customized.

 

 

aluminium                                                wood

 

plywood                                              plastic pipe

Each saw blade undergoes 35 precise steps and 8 rigorous inspections, with every single one being meticulously checked before moving forward.

1. Hardness Inspection
Every blade is tested to confirm steel plate hardness meets specifications.

2. Projector Inspection
Each blade's angles are verified to be within standardized tolerance.

3. Stress Inspection
Blade tension is inspected to ensure proper stress distribution.

4. Side Runout Inspection
Lateral protrusion of every blade is controlled within standard limits.

5. Concentricity Inspection
Tooth tip grinding accuracy is guaranteed for consistent performance.

6. Sharpness Ratio Inspection
A 200x optical magnifier ensures each blade meets sharpness standards.

7. Comprehensive Edge Grinding Test
Fully automated equipment validates overall blade performance.

8. Final Cutting Test
Every blade undergoes trial cutting before leaving the factory.

The equipment must be in good condition: the spindle should be free from deformation or radial runout. Mount the blade securely to eliminate vibration.

Inspect the blade for any damage. Ensure the teeth are intact and the blade body is flat and smooth, with no other abnormalities, to guarantee safe operation.

During assembly, confirm that the blade's directional arrow matches the rotation direction of the equipment spindle.

Keep the spindle, chuck, and flanges clean during installation. The flange inner diameter must match the blade's bore. Ensure the flanges fit snugly against the blade, install the locating pin, and tighten the nut. Flange size must be appropriate, with an outer diameter no less than 1/3 of the blade diameter.

Before starting the equipment, and only when safe, a single operator should jog the system to check for correct rotation direction and any vibration. After installation, let the blade run idle for several minutes. Only proceed with work if there is no slipping, wobbling, or blade bounce.

 

According to shipping schedule,these containers will be loaded onto the right vessel,then the ship will leave shipping port,and are about to sail to your destination.

Q:Who are we?
A:Zhengzhou Fanchuang Science and Technology Co., Ltd. is based in Zhengzhou, Henan Province – the heart of China's abrasive and grinding wheel industry. As a professional manufacturer, we specialise in the production of abrasive and grinding tools. With over ten years of development, we have built a diversified production system to meet the broad needs of the grinding industry. All our products meet international quality standards and are well received across global markets.

Q: Can you accept customization?
A: Yes, we provide extensive customisation services. Simply share your specific requirements – such as design, colour, dimensions, or special features – and we will tailor the product to your needs.

Q: Are samples available for quality test?
A: Samples are available for quality verification. Typically, we provide samples free of charge, though shipping costs are covered by the customer. The sample fee will be refunded upon confirmation of your bulk order.

Q:How long can I get a sample or some samples?

A:Samples are usually prepared within 1–3 working days. To expedite shipment, please provide your courier account details. If you don't have one, we can assist with freight arrangements and share the shipping cost for your review.

Q: How can you guarantee quality?
A: We maintain a professional management team, technical expertise, and strict quality control protocols. Every production stage is closely monitored by our dedicated QC team to ensure precision and consistency.

Q: What are your terms of payment?
A: We accept T/T, L/C, PayPal, Western Union, and other flexible payment options – all open to discussion.

Q: Which is your nearest loading port?
A: Our main port is Qingdao. However, we can also ship via other ports such as Ningbo, Shanghai, or Shenzhen based on your preference.

Hot Tags: woodworking saw blade110x1.8x20x40t, China woodworking saw blade110x1.8x20x40t manufacturers, suppliers, abrasive wheel for grinding metals, grinding tool for finishing, metal-bonded grinding tool, metal-bonded grinding tool designs, resin-bonded cutting disc, vitrified abrasive tool models